INSONO AF3 adhesive is a homogeneous solvent free, low odour, acrylic latex emulsion based adhesive. It is used for interior installation of INSONO AF3 acoustic membrane.
INSONO AF3 adhesive is ready-to-use. No mixing required. Remove the container lid and spread the adhesive. Pour into a pan or spread directly on the substrate. INSONO AF3 adhesive is applied using a 10 mm nap roller. Set the INSONO AF3 membrane while the adhesive is fresh. Do not alow the adhesive to skin-over or dry before applying the membrane.
Storage instructions
Up to 12 months in original sealed container. Store in a ventilated place, away from heat and direct sunlight.
Cleaning
Tools and uncured INSONO AF3 adhesive can be cleaned with water. If INSONO AF3 adhesive is cured clean with solvents, such as mineral spirits, Varsol, xylene, etc.
INSONO AF3 ADHESIVE
product line
Product 1
Diameter
Slope
Colour/Finish
Length
Width
Thickness
Size
Weight
Volume
Quantity per packaging
Container
Granules size
Weight per surface (kg/m² or lb/ft²)
Coverage per pail
Gross area
Net area
Application temperature
Units per skid
R Value
Board thickness
Temperature grade
Fire resistant
Minimum Thickness
Maximum Thickness
Option
INSONO AF3 ADHESIVE
Product code: 24954
Diameter
Slope
Colour/FinishBEIGE
Length
Width
Thickness
Size
Weight
Volume19 l
Quantity per packaging
Container
Granules size
Weight per surface (kg/m² or lb/ft²)
Coverage per pail65 to 84 m²/ 19 L (688 to 904 ft²/ 5 US GALLON)
Gross area
Net area
Application temperature10 °C (41 °F) to 35 °C (95 °F)