SOPRA-FLASH WR2016 is a non-woven polyester reinforcement. SOPRA-FLASH WR2016 is used as a reinforcement in COLPHENE H hot-applied rubberized asphalt waterproofing membranes systems. Its absorption capability allows to quickly wet into and become encapsulated by COLPHENE H membrane.
- Good compatibility with COLPHENE H hot rubberized liquid membrane
- Good thermal resistance
COLPHENE H membrane system is applied with a flat squeegee. Do not use a notched squeegee. Apply the base coat of COLPHENE H to the substrate. Immediately unroll the SOPRA-FLASH WR2016 into the base coat of COLPHENE H while it is hot liquid state by ensuring a 75 mm (3 in) overlap of adjacent sheets. Avoid the formation of wrinkles, voids or fishmouths. Apply light pressure with a flat squeegee to eliminate air bubbles, wrinkles, etc. Allow fleece to saturate with resin from bottom up. Apply the top coat of COLPHENE H over the SOPRA-FLASH WR2016 reinforcement. *Refer to individual product data sheets for specific recommendations and requirements.
SOPRA-FLASH WR2016 must be stored in a cool and dry location and sheltered from inclement weather. Store flat to avoid deforming rolls and creasing fabric.